[Optimization of prediction model for personalized water pills based on semantic analysis of traditional Chinese medicine materials].

This study aims to optimize the prediction model of personalized water pills that has been established by our research group. Dioscoreae Rhizoma, Leonuri Herba, Codonopsis Radix, Armeniacae Semen Amarum, and calcined Oyster were selected as model medicines of powdery, fibrous, sugary, oily, and brittle materials, respectively. The model prescriptions were obtained by uniform mixing design. With hydroxypropyl methylcellulose E5(HPMC-E5) aqueous solution as the adhesive, personalized water pills were prepared by extrusion and spheronizaition. The evaluation indexes in the pill preparation process and the multi-model statistical analysis were employed to optimize and evaluate the prediction model of personalized water pills. The prediction equation of the adhesive concentration was obtained as follows: Y_1=-4.172+3.63X_A+15.057X_B+1.838X_C-0.997X_D(adhesive concentration of 10% when Y_1<0, and 20% when Y_1>0). The overall accuracy of the prediction model for adhesive concentration was 96.0%. The prediction equation of adhesive dosage was Y_2=6.051+94.944X_A~(1.5)+161.977X_B+70.078X_C~2+12.016X_D~(0.3)+27.493X_E~(0.3)-2.168X_F~(-1)(R~2=0.954, P<0.001). Furthermore, the semantic prediction model for material classification of traditional Chinese medicines was used to classify the materials contained in the prescription, and thus the prediction model of personalized water pills was evaluated. The results showed that the prescriptions for model evaluation can be prepared with one-time molding, and the forming quality was better than that established by the research group earlier. This study has achieved the optimization of the prediction model of personalized water pills.

[Composite excipients for preparing concentrated water pills of personalized traditional Chinese medicine prescriptions by extruding-rounding method].

This study aims to optimize the composite excipients suitable for the preparation of concentrated water pills of personalized traditional Chinese medicine prescriptions by the extruding-rounding method and investigate the roles of each excipient in the preparation process. The fiber materials and powder materials were taken as the standard materials suitable as excipients in the preparation of personalized concentrated water pills without excipient. Water absorption properties and torque rheology were used as indicators for selecting the materials of composite excipients. The ratio of composite excipients was optimized by D-optimal mixture design. Moreover, to demonstrate the universal applicability of the optimal composite excipients, this study selected three traditional Chinese medicine prescriptions with low, medium, and high extraction rates to verify the optimal ratio. Finally, the effects of each selected excipient on the molding of personalized concentrated water pills were investigated with the four parameters of the pill molding quality as indicators. The optimized composite excipients were dextrin∶microcrystalline cellulose(MCC)∶low-substituted hydroxypropyl cellulose(L-HPC) at a ratio of 1∶2∶4. The composite excipients were used for the preparation of personalized concentrated water pills with stable process, good quality, and a wide range of application. Dextrin acted as a diluent and accelerated the speed of extruding. MCC mainly served as an adhesive, increasing the cohesion and viscosity of the pills. L-HPC as a water absorbent and disintegrating agent can absorb and hold the water of the concentrate and has a strong disintegration effect.

[Research practice and development direction of intelligent manufacturing of presonalized traditional Chinese medicine preparations].

In recent years, as people's living standards continue to improve, and the pace of life accelerates dramatically, the demand and quality of traditional Chinese medicine(TCM) services from patients continue to rise. As an essential supplement to the existing forms of TCM application, such as Chinese patent medicine, decoction, and formulated granules, presonalized TCM preparations is facing an increasing market demand. Currently, manual and semi-mechanized production are the primary production ways in presonalized TCM preparations. However, the production process control level is low, and digitalization and informatization need to be improved, which restricts the automated and intelligent development of presonalized TCM preparations. Presonalized TCM preparations faces a significant opportunity and challenge in integrating with intelligent manufacturing through research and development of intelligent equipment and core technology. This paper overviews the connotation and characteristics of intelligent manufacturing and summarizes the application of intelligent manufacturing technologies such as "Internet of things" "big data", and "artificial intelligence" in the TCM industry. Based on the innovative research and development model of "intelligent classification of TCM materials, intelligent decision making of prescription and process, and online control and intelligent production" of presonalized TCM preparations, the research practice and achievements from our research group in the field of intelligent manufacturing of presonalized TCM preparations are introduced. Ultimately, the paper proposes the direction for developing intelligent manufacturing of presonalized TCM preparations, which will provide a reference for the research and application of automation and intelligence of presonalized TCM preparations.

[Molding law of traditional Chinese medicine gel plaster based on physicochemical properties of raw materials and intermediates].

This paper aims to study the correlation between the physicochemical properties of raw materials and intermediates and the molding quality and law of traditional Chinese medicine(TCM) gel plaster by using TCM slices and powder as raw materials. 48 TCM compounds are selected as model prescriptions to prepare gel plasters. The rotational rheometer is used to determine the rheological parameters of the plaster, including storage modulus(G'), loss modulus(G″), yield stress(τ), and creep compliance [J(t)]. The molding quality of the prepared TCM gel plaster is evaluated by subjective and objective measures. Clustering and principal component analysis are conducted to evaluate the physical properties of the plaster. By measuring the rheological properties of the plaster, the molding quality of the TCM gel plaster can be predicted, with an accuracy of 83.72% after seven days of modeling and 88.37% after 30 days of modeling. When the parameters such as G' and G″ of the plaster are large, and the [J(t)] is small, the molding quality of the plaster is better. When the plaster coating point is no less than 3, it is difficult to be coated. In addition, when the proportion of metal ions in the prescription is higher, the 30-day forming quality of the plaster is mainly affected, and the viscosity of the plaster is poor. If the prescription contains many acidic chemical components, the 7-day forming quality of the plaster is mainly affected, with many residuals. The results suggest that the rheological properties of the plaster can be used to predict the molding quality of TCM slice and powder gel plaster. It can provide a reference for the development of TCM gel plaster prescriptions.

[Intelligent material classification of traditional Chinese medicine based on semantic analysis].

A method for material classification of traditional Chinese medicines based on the physical properties of powder has been established by our research group. This method involves pre-treatment of traditional Chinese medicine decoction pieces, powder preparation, and determination of physical properties, being cumbersome. In this study, the word segmentation logic of semantic analysis was adopted to establish the thesaurus and local standardized semantic word segmentation database with the macroscopic and microscopic characteristics of 36 model traditional Chinese medicines as the basic data. The physical properties of these medicines have been determined and the classification of these medicines is clear in the cluster analysis. A total of 55 keywords for powdery, fibrous, sugary, oily, and brittle materials were screened by association rules and the set inclusion and exclusion criteria, and the weights of the keywords were calculated. Furthermore, the algorithms of the keyword matching scores and the computation rules of the single or multiple material classification were established for building the intelligent model of semantic analysis for the material classification. The semantic classification results of the other 35 TCMs except Pseudostellariae Radix(multi-material medicine) agreed with the clustering results based on the physical properties of the powder, with an agreement rate of 97.22%. In model validation, the prediction results of semantic classification of traditional Chinese medicines were consistent with the clustering results based on the physical properties of powder, with an agreement rate of 83.33%. The results showed that the method of material classification based on semantic analysis was feasible, which laid a foundation for the development of intelligent decision-making technology for personalized traditional Chinese medicine preparations.

[Molding matrix formulation of hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine preparations].

This study aims to optimize the matrix formulation for the hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine(TCM) preparations and verify the applicability of the formulation. The central composite design in JMP Pro 16.1.0 was employed to optimize the dosages of styrene-isoprene-styrene triblock copolymer(SIS), hydrogenated petroleum resin, and lightweight liquid paraffin, with the fine powder of Yipifang as the model drug(drug loading of 10%) and the sensory score and objective evaluation as the comprehensive evaluation indicators. The quality evaluation system of hot-melt pressure-sensitive adhesive plaster of personalized TCM preparations was established. The applicability of the optimized matrix formulation of hot-melt pressure-sensitive adhesive plaster was verified with 16 TCM preparations for external application. Furthermore, the applicability of the matrix formulation was investigated with different drug loadings. The general molding matrix formulation was SIS∶hydrogenated petroleum resin∶lightweight liquid paraffin 3∶3∶5. The optimized matrix formulation showed good molding properties and high quality scores for 16 TCM preparations and were suitable for the plastering of finely powdered decoction pieces with a loading capacity of 10% to 30%. The results suggest that the optimized matrix formulation has good applicability and is suitable for TCM preparations. The findings lay a foundation for the application and promotion of the hot-melt pressure-sensitive adhesive plasters of personalized TCM preparations.

[Preparation process selection of presonalized traditional Chinese medicine concentrated watered pills containing heat-unstable components].

In the process of preparing presonalized concentrated watered pills, the decoction needs to be concentrated by heat and mixed with medicinal slices or powder to prepare a wet mass. However, some of the traditional Chinese medicine(TCM) components are easily decomposed or transformed by heat. In order to optimize the preparation process of presonalized TCM concentrated watered pills and reduce the loss of heat-unstable components in prescriptions, this study uses five compound TCM prescriptions containing heat-unstable components as model prescriptions, namely the Linggui Zhugan Formula, Xiaochengqi Formula, Sanpian Formula, Xiaoer Qixing Formula, and Xiaoyao Formula. Based on the two kinds of preparation process of presonalized concentrated watered pills previously established by our research group, whole extract concentrated watered pills and concentrated watered pills without excipients are prepared, respectively. Characteristic maps are measured and compared with those of the corresponding decoction. The results show that the characteristic maps of the concentrated watered pills without excipients of the five model prescriptions are very close to those of the decoction, and the number of characteristic peaks and peak areas are higher than those of whole extract concentrated watered pills. In addition, the peak area of some peaks is higher than that of the corresponding decoction. Thus, it is recommended to select the preparation process of prescription-based concentrated watered pills without excipients based on the "unification of medicines and excipients" to preserve those heat-unstable components more effectively when the prescription contains a heat-unstable component of TCM. This study provides a basis for the subsequent reasonable development and application of presonalized TCM pills.

Synthesis of Asp-based lactam cyclic peptides using an amide-bonded diaminodiacid to prevent aspartimide formation.

Asp-based lactam cyclic peptides are considered promising drug candidates. However, using Fmoc solid-phase peptide synthesis (Fmoc-SPPS) for these peptides also causes aspartimide formation, resulting in low yields or even failure to obtain the target peptides. Here, we developed a diaminodiacid containing an amide bond as a ß-carboxyl-protecting group for Asp to avoid aspartimide formation. The practicality of this diaminodiacid has been illustrated by the synthesis of lactam cyclic peptide cyclo[Lys9,Asp13] KIIIA7-14 and 1Y.

Synergistic effects of ceftazidime/avibactam combined with meropenem in a murine model of infection with KPC-producing Klebsiella pneumoniae.

OBJECTIVES: The emergence and expansion of carbapenem-resistant Klebsiella pneumoniae infections is a concern due to the lack of 'first-line' antibiotic treatment options. The ceftazidime/avibactam is an important clinical treatment for carbapenem-resistant K. pneumoniae infections but there is an increasing number of cases of treatment failure and drug resistance. Therefore, a potential solution is combination therapies that result in synergistic activity against K. pneumoniae carbapenemase: producing K. pneumoniae (KPC-Kp) isolates and preventing the emergence of KPC mutants resistant to ceftazidime/avibactam are needed in lieu of novel antibiotics. METHODS: To evaluate their synergistic activity, antibiotic combinations were tested against 26 KPC-Kp strains. Antibiotic resistance profiles, molecular characteristics and virulence genes were investigated by susceptibility testing and whole-genome sequencing. Antibiotic synergy was evaluated by in vitro chequerboard experiments, time-killing curves and dose-response assays. The mouse thigh model was used to confirm antibiotic combination activities in vivo. Additionally, antibiotic combinations were evaluated for their ability to prevent the emergence of ceftazidime/avibactam resistant mutations of blaKPC. RESULTS: The combination of ceftazidime/avibactam plus meropenem showed remarkable synergistic activity against 26 strains and restored susceptibility to both the partnering antibiotics. The significant therapeutic effect of ceftazidime/avibactam combined with meropenem was also confirmed in the mouse model and bacterial loads in the thigh muscle of the combination groups were significantly reduced. Furthermore, ceftazidime/avibactam plus meropenem showed significant activity in preventing the occurrence of resistance mutations. CONCLUSIONS: Our results indicated that the combination of ceftazidime/avibactam plus meropenem offers viable therapeutic alternatives in treating serious infections due to KPC-Kp.

Rh(III)-Catalyzed C7-Alkylation of Isatogens with Malonic Acid Diazoesters.

Rh(III)-catalyzed C7-alkylation of isatogens (indolin-3-one N-oxides) with malonic acid diazoesters has been developed. This strategy utilizes oxygen anion on the N-oxide group of isatogens as a directing group and successfully achieves the synthesis of a series of C7-alkylated isatogens with moderate to good yields (48-86% yields). Moreover, the N-oxides of isatogens can not only serve as the simple directing group for C7-H bond cleavage but also be deoxidized for easy removal.

Temporal genetic variation mediated by climate change-induced salinity decline, a study on Artemia (Crustacea: Anostraca) from Kyêbxang Co, a high altitude salt lake on the Qinghai-Tibet Plateau.

The Qinghai-Tibet Plateau is one of the areas the richest in salt lakes and Artemia sites. As a result of climate warming and wetting, the areas of salt lakes on the plateau have been increasing, and the salinities have decreased considerably since 1990s. However, the impact of salinity change on the genetic diversity of Artemia is still unknown. Kyêbxang Co is the highest (4620 m above sea level) salt lake currently with commercial harvesting of Artemia resting eggs in the world, and harbors the largest Artemia population on the plateau. Its salinity had dropped from âˆ¼67 ppt in 1998 to âˆ¼39 ppt in 2019. Using 13 microsatellite markers and the mitochondrial cytochrome oxidase submit I (COI) gene, we analyzed the temporal changes of genetic diversity, effective population size and genetic structure of this Artemia population based on samples collected in 1998, 2007 and 2019. Our results revealed a steady decline of genetic diversity and significant genetic differentiation among the sampling years, which may be a consequence of genetic drift and the selection of decreased salinity. A decline of effective population size was also detected, which may be relative to the fluctuation in census population size, skewed sex ratio, and selection of the declined salinity. In 2007 and 2019, the Artemia population showed an excess of heterozygosity and significant deviation from Hardy-Weinberg Equilibrium (p < 0.001), which may be associated with the heterozygote advantage under low salinity. To comprehensively understand the impact of climate warming and wetting on Artemia populations on the plateau, further investigation with broad and intensive sampling are needed.

Population genetics of Artemia urmiana species complex (Crustacea, Anostraca): A group with asymmetrical dispersal and gene flow mediated by migratory waterfowl.

Bird-mediated dispersal of resting eggs is the main mechanism for Artemia dispersal among catchments. The bisexual populations of Artemia urmiana species complex, which is here considered to be a collection of Artemia genetically close to the so-called "Western Asian Lineage", are mostly distributed in central and western Asia (i.e., in regions falling into the Central Asian Flyway of migratory birds) and live in diversified habitats. Little is known about the genetic relationships among these populations. Aiming to understand the population genetic characteristics and the roles of migratory birds on the dispersal and gene flow of this Artemia group, we evaluated the genetic diversity, genetic differentiation, and gene flow among 14 populations, with their altitudes ranging from 540 to 4870 m above sea level, using 13 microsatellite markers. Almost all populations exhibited high genetic diversity and heterozygote excess, which may be a consequence of combined effects of dispersal and hybridization. The global genetic differentiation (FST) value was 0.092, the pairwise FST values were 0.003-0.246. Discriminant analysis of principal components identified three genetic clusters, consisting of Urmia Lake (Iran), Zhundong (Xinjiang, China), and 12 Qinghai-Tibet Plateau populations, respectively. The among-population genetic differentiation seems to be a consequence of isolation by distance and adaptation to diversified habitats induced by altitudinal gradient. Historical gene flows are asymmetrical, and show an evolutionary source-sink dynamics, with Jingyu Lake (Xinjiang, China) population being the major source. These results support our hypothesis that in Qinghai-Tibet Plateau and surrounding areas the bird-mediated dispersal of Artemia may be biased towards from north to south and/or from higher altitude to lower altitude.

DJ1 Ameliorates AD-like Pathology in the Hippocampus of APP/PS1 Mice.

Objective: To explore whether the protein Deglycase protein 1 (DJ1) can ameliorate Alzheimer's disease (AD)-like pathology in Amyloid Precursor Protein/Presenilin 1 (APP/PS1) double transgenic mice and its possible mechanism to provide a theoretical basis for exploring the pathogenesis of AD. Methods: Adeno-associated viral vectors (AAV) of DJ1-overexpression or DJ1-knockdown were injected into the hippocampus of 7-month-old APP/PS1 mice to construct models of overexpression or knockdown. Mice were divided into the AD model control group (MC), AAV vector control group (NC), DJ1-overexpression group (DJ1 +), and DJ1-knockdown group (DJ1 -). After 21 days, the Morris water maze test, immunohistochemistry, immunofluorescence, and western blotting were used to evaluate the effects of DJ1 on mice. Results: DJ1 + overexpression decreased the latency and increased the number of platform traversals in the water maze test. DJ1 - cells were cured and atrophied, and the intercellular structure was relaxed; the number of age spots and the expression of AD-related proteins were significantly increased. DJ1 + increased the protein expression of Nuclear factor erythroid 2-related factor 2 (NRF2), heme oxygenase-1 (HO-1), light chain 3 (LC3), phosphorylated AMPK (p-AMPK), and B cell lymphoma-2 (BCL-2), as well as the antioxidant levels of total superoxide dismutase (T-SOD), total antioxidant capacity (T-AOC), and Glutathione peroxidase (GSH-PX), while decreasing the levels of Kelch-like hydrates-associated protein 1 (Keap1), mammalian target of rapamycin (mTOR), p62/sequestosome1 (p62/SQSTM1), Caspase3, and malondialdehyde (MDA). Conclusion: DJ1-overexpression can ameliorate learning, memory, and AD-like pathology in APP/PS1 mice, which may be related to the activation of the NRF2/HO-1 and AMPK/mTOR pathways by DJ1.

Morroniside ameliorates lipopolysaccharide-induced inflammatory damage in iris pigment epithelial cells through inhibition of TLR4/JAK2/STAT3 pathway.

AIM: To investigate the effect of morroniside (Mor) on lipopolysaccharide (LPS)-treated iris pigment epithelial cells (IPE). METHODS: IPE cells were induced by LPS and treated with Mor. Cell proliferation was detected by cell counting kit (CCK) -8, apoptosis was detected by flow cytometry, the levels of tumor necrosis factor-α (TNF-α), interleukin (IL)-6, and IL-8 were measured by enzyme-linked immunosorbent assay (ELISA) kits, and the protein expression of TLR4, JAK2, p-JAK2, STAT3, and p-STAT3 was analyzed by Western blotting. In addition, overexpression of TLR4 and Mor treatment of LPS-stimulated IPE cells were also tested for the above indices. RESULTS: Mor effectively promoted the proliferation and inhibited the apoptosis of LPS-treated IPE cells. In addition, Mor significantly reduced the levels of TNF-α, IL-6, and IL-8 and significantly inhibited the expression of TLR4, p-JAK2, and p-STAT3 in LPS-treated IPE cells. The effect of Mor on LPS-treated IPE cells was markedly attenuated after overexpression of TLR4. CONCLUSION: These findings suggest that Mor may ameliorate LPS-induced inflammatory damage and apoptosis in IPE through inhibition of TLR4/JAK2/STAT3 pathway.

The Morphological Transformation of the Thorax during the Eclosion of Drosophila melanogaster (Diptera: Drosophilidae).

The model organism Drosophila melanogaster, as a species of Holometabola, undergoes a series of transformations during metamorphosis. To deeply understand its development, it is crucial to study its anatomy during the key developmental stages. We describe the anatomical systems of the thorax, including the endoskeleton, musculature, nervous ganglion, and digestive system, from the late pupal stage to the adult stage, based on micro-CT and 3D visualizations. The development of the endoskeleton causes original and insertional changes in muscles. Several muscles change their shape during development in a non-uniform manner with respect to both absolute and relative size; some become longer and broader, while others shorten and become narrower. Muscular shape may vary during development. The number of muscular bundles also increases or decreases. Growing muscles are probably anchored by the tissues in the stroma. Some muscles and tendons are absent in the adult stage, possibly due to the hardened sclerites. Nearly all flight muscles are present by the third day of the pupal stage, which may be due to the presence of more myofibers with enough mitochondria to support flight power. There are sexual differences in the same developmental period. In contrast to the endodermal digestive system, the functions of most thoracic muscles change in the development from the larva to the adult in order to support more complex locomotion under the control of a more structured ventral nerve cord based on the serial homology proposed herein.

Insight into Dysmenorrhea Research from 1992 to 2022: A Bibliometric Analysis.

Dysmenorrhea, classified as primary dysmenorrhea and secondary dysmenorrhea, is a common gynecological symptom that seriously affects female daily life. At present, studies on dysmenorrhea are numerous and complex. To better reflect the trend and innovative progress of dysmenorrhea-related research, this study screened papers on the Web of Science from January 1, 1992, to December 31, 2022. A total of 1012 papers were selected and analyzed for their affiliated countries, institutions, authors, keywords, etc. China is the country with the most academic output, Beijing University of Traditional Chinese Medicine is the most influential institution, and Yang Jie, from Chengdu University of Traditional Chinese Medicine, China, is the scholar with the most papers. We consider that the current research focus is on pathogenesis, treatment, epidemiology, and self-management. With increasing research on functional connectivity between dysmenorrhea and various brain regions, functional connectivity has gradually become the forefront of research. We hope our study can promote the further study of dysmenorrhea.

Superconductivity Above 100 K Predicted in Carbon-Cage Network.

To explore carbide superconductors with higher transition temperature, two novel carbon structures of cage-network are designed and their superconductivity is studied by doping metals. MC6 and MC10 are respectively identified as C24 and C32 cage-network structures. This study finds that both carbon structures drive strong electron-phonon interaction and can exhibit superconductivity above liquid nitrogen temperature. Importantly, the superconducting transition temperatures above 100 K are predicted to be achieved in C24 -cage-network systems doped by Na, Mg, Al, In, and Tl at ambient pressure, which is far higher than those in graphite, fullerene, and other carbides. Meanwhile, the superconductivity of cage-network carbides is also found to be sensitive to the electronegativity and concentration of dopant M. The result indicates that the higher transition temperatures can be obtained by optimizing the carbon-cage-network structures and the doping conditions. The study suggests that the carbon-cage-network structure is a direction to explore high-temperature superconducting carbides.

Is histological healing more clinically valuable than endoscopic healing in Crohn's disease?

OBJECTIVES: Small bowel (SB) endoscopic healing has not been well explored in patients with Crohn's disease (CD). This study aimed to assess the clinical utility of SB endoscopic mucosal and histological healing in patients with CD. METHODS: In total, 99 patients with CD in clinical-serological remission were retrospectively followed after they underwent colonoscopy and double-balloon enteroscopy. Time until clinical relapse (CD activity index of >150 with an increase of >70 points) and serological relapse (abnormal elevation of C-reactive protein levels) constituted the primary endpoints. RESULTS: Of the 99 patients, 75 (74.7%) exhibited colonoscopic healing and 43 (43.4%) exhibited SB endoscopic healing. Clinical relapse, serological relapse, hospitalization, and surgery occurred in 8 (18.6%), 11 (25.6%), 11 (25.6%), and 2 (4.6%) patients, respectively. Of the 43 patients who exhibited SB endoscopic healing, 21 (48.8%) achieved histological healing. Clinical relapse, serological relapse, hospitalization, and surgery occurred in 4 (19.0%), 7 (33.3%), 7 (33.3%), and 1 (4.8%) patient, respectively. There was no statistically significant difference in the number of patients who relapsed, were hospitalized, or underwent surgery between those who exhibited histological healing and those who did not. CONCLUSION: A substantial number of patients who were in clinical-serological remission did not undergo SB endoscopic healing, and the lesions increased their risk of clinical relapse. Thus, endoscopic healing may be of greater clinical value than histological healing when evaluating the remission of patients with CD.

Mefloquine targets NLRP3 to reduce lipopolysaccharide-induced systemic inflammation and neural injury.

The NLR family pyrin domain containing 3 (NLRP3) inflammasome plays an important role in the pathogenesis of a wide variety of human diseases. So far, drugs directly and specifically targeting the NLRP3 inflammasome are not available for clinical use since the safety and efficacy of new compounds are often unclear. A promising approach is thus to identify NLRP3 inhibitors from existing drugs that are already in clinical use. Here, we show that mefloquine, a well-known antimalarial drug, is a highly selective and potent NLRP3 inhibitor by screening a FDA-approved drug library. Mechanistically, mefloquine directly binds to the NLRP3 NACHT and LRR domains to prevent NLRP3 inflammasome activation. More importantly, mefloquine treatment attenuates the symptoms of lipopolysaccharide-induced systemic inflammation and Parkinson's disease-like neural damage in mice. Our findings identify mefloquine as a potential therapeutic agent for NLRP3-driven diseases and migth expand its clinical use considerably.